Run Cars On Water
CLICK HERE to Receive Your CONVERSION GUIDE
2008 Run Cars on Water is somewhat of a "buzz" at the moment. You've probably seen untold ads in the market telling you to slash what you pay at the pump and convert to H20 run cars.
Is this a scam? Can you really add water into your car?
With gas prices having doubled since May 2007 and now approaching $5 a gallon, it's of no surprise why interest is so keen.
Lets just clarify to begin with that you DO NOT pour water into your gas tank.
What you do is install a conversion apparatus which converts H20 into HH0 (Browns gas) which is then fed into your engine to supplement your fuel intake and subsequently reduce your fuel costs.
Here is an example of how the Water/Gas Conversion Kit is installed:
This can be done manually, or your local mechanic will be able to install it. Remember, this conversion kit is not irreversible, so there is no long term damage.
Run Cars on water was introduced later last year. This guide is the direct result of many water-fuel systems built by Bill Lang, Tom Lang and the author.
Applicable to diesel or petrol/gasoline run vehicles, you can cut your fuel costs by up to 40% and reduce harmful emissions as less gasoline is being fed into the engine. This water/gas conversion kit can be installed on any diesel or gas engine.
For More info on converting your car to supplement your gasoline intake with HH0, here are my additional tips on apparatus that will help to improve your cars efficiency:
10 Further Tips!
1) An Electrolyzer: Or commonly known as a "Hydrogen Generator". This has spiral electrodes which emit considerably more HH0 and requires less energy from the car battery.
2) Map Sensor Enhancer: This electronic device reduces fuel consumption but does not interfere with your computer or engine. To maximize ones fuel economy, this is a must.
3) A Vaporizer: This cools the engine down whilst adding water vapor which will drastically improve your fuel economy and combustion.
4) Fuel Heater: This improves your gas economy by pre-heating your gasoline through the heat emitted from the radiator, FREE heat that normally gets wasted. This requires no changes to your radiators hoses.
5) PVC Enhancer: Positive Crankcase Ventilation which saves gas and protects the engine.
6) Fuse Holder and Wiring: Connected to your 12 volts
7) Vacuum T-Connector: Which will split the vacuum line in two for delivering O2 and HH0 into the engine
8) Two Vacuum Hoses: Three and a half feet in length. One will connect to the air filter, the other to the manifold intake.
9) Mechanical instillation Hardware: Cable straps for the fuel heater, 6 bungee cord cable straps for the electrolyzer, flex tubing for the wiring harness and vinyl tubing.
10) Catalyst: Baking soda is used to turn H20 into HH0.
OH, AND WATER!
CLICK BELOW for your CONVERSION GUIDE .....
